Assa Abloy Zi IKON CLIQ Go, Manual

Page: 49 / 54

6
..
Appendix
49
LED Indications Buzzer Interpretation
1 short green 1 short Authorised to open cylinder
3 short red 3 short Non-authorised to open
cylinder.
1 short red + 1 short green
+ 1 short red 3 short Not valid according to key
schedule.
Table 5. Indications when opening cylinders
Table 6 “Indications when performing tasks” , page 49 shows the indications when the
eCLIQ user key is used for performing tasks. If no tasks are loaded on the eCLIQ user key,
only the indications shown in Table 5
“Indications when opening cylinders” , page 49 will
be visible.
LED Indications Buzzer Interpretation
1 long green every other
second until key is removed
from cylinder 1 long every other second
until key is removed from
cylinder Tasks approved.
3 short red every other
second until key is removed
from cylinder 3 short every other second
until key is removed from
cylinder Tasks not approved.
1 short green every second - Task under execution
(if task execution is longer
than 150 ms)
Table 6. Indications when performing tasks
6.3 CLIQ™ Go vs CWM
Listed below is a number of tables that shows the differences between CLIQ™ Go and
CLIQ™ Web Manager (CWM). Table overview:
•
Table 7 “Hardware” , page 49
•
Table 8 “Authorisation principles” , page 50
•
Table 9 “Grouping functions” , page 50
•
Table 10 “Remote Feature” , page 51
•
Table 11 “Other” , page 51
Hardware CLIQ™ Go CWM Comment
User Keys CWM supports
mechanical keys, Normal
keys, Quartz keys and
Dynamic keys.
CLIQ™ Go only has
Dynamic keys.
C-Keys In CLIQ™ Go, user keys
are used both as user
keys and C-Keys.
Table 7. Hardware