P/N
-
-
Rev E
YRL PBINSTL FUL
16
Definitions
All Code Lockout Mode:
This feature is enabled by the Master code. When enabled, it restricts all user (except
Master)
code access. When attempting to enter a code while the unit is in Lockout, the keypad flashes 8
PIN
times and the lock beeps 3 times as well.
Audio Mode:
Disable (3)
Choosing
in Audio mode shuts off the code confirmation tone play-back for use in quiet
areas. Audio mode is enabled or disabled through feature programming by the Master code.
Automatic Re-lock Time:
After a successful unlock, the unit will automatically re-lock after thirty (30) seconds.
Low Battery:
When battery power is low, the Status Indicator flashes
. If battery power is completely lost,
RED
use the key override.
Master
Code:
It must be created
PIN
The Master
code is used for programming and for feature settings.
PIN
prior to programming the lock.
The Master code will also operate (unlock/lock) the lock.
Network Module Setting:
This setting is available thru the main Menu (7) and allows the lock to connect with a
network controller. It is also available through the wireless button on the interior escutcheon.
One Touch Locking:
When the latch is retracted, activating the keypad will extend the latch (during Automatic Re-
lock duration or when Automatic Re-lock is disabled).
Privacy Mode:
Privacy mode is disabled by default. Enable Privacy mode by pressing the privacy button for 4
seconds to put the lock in do-not-disturb mode (all pin codes are disabled).
Shutdown Time:
The unit will shut down (flashing keypad) for sixty (60) seconds and not allow operation after
the wrong code entry limit has been met.
Tamper Alert:
Audible alarm sounds if attempting to forcibly remove outside lock from door.
User
Code:
PIN
The User code operates the lock. Maximum number of user codes is 250 with Network Module;
without Network Module, maximum is 25 user codes.
Wrong Code Entry Limit:
After five (5) unsuccessful attempts at entering a valid
code, the unit will shut
PIN
down and not allow operation.
