1
500-23710_1
Package Contents
•
Microwave
motion sensor
•
Faceplate
•
Weather-resistant
gasket
•
Faceplate screws
•
Mounting ring
•
Instructions
•
Adapter ring
Specifications
ELECTRICAL
INPUT 12 to 24 VAC ±10%
12 to 24 VDC +30%/-10%
50 to 60 Hz
<1.5W
OUTPUT
Relay contact rating (max voltage)
Relay contact rating (max current)
Max switching power
Relay with switch-over contact (voltage free)
60 VDC/125 VAC
1A (resistive)
30W DC / 60 VAC
DETECTION RANGE
4” to 24” (10cm to 60cm)(adjustable)
DETECTION MODE
Motion (bidirectional)
OUTPUT HOLD TIME
0.5-30 seconds
OPERATING TEMPERATURE
-4 °F to +131 °F (-20 °C to +55 °C)
IMMUNITY
Immune to electrical and radio frequency interference
WEIGHT
0.34 lbs (0.15 kg)
REGULATORY
Electromagnetic compatibility (EMC) according to
2004/108/EC FCC: G9B-21016 IC: 4680A-21016
Precautions
1. SHUT OFF power to header before attempting any wiring procedures.
2. MAINTAIN a clean and safe environment when working in public areas.
3. Constantly BE AWARE of pedestrian traffic around the door area.
4.
Always
STOP pedestrian traffic through the doorway when performing tests that may
result in unexpected reactions by the door.
5.
OBSERVE
proper protocols for circuit board handling to protect the unit from
electrostatic discharge.
6.
Before handling any board, ENSURE dissipation of any bodily charge.
7.
CHECK placement of all wiring before powering to ensure that moving door parts do
not catch wires and cause damage to equipment.
8.
ENSURE compliance with all applicable safety standards (i.e., ANSI A156.10/A156.19)
upon completion of installation.
