2
500-23710_1
9. DO NOT ATTEMPT any repair of the sensor.
10. Unauthorized disassembly or repair:
•
May jeopardize personal safety and may cause exposure to the risk of electrical
shock.
•
Will void the product warranty.
Installation / Wiring / Setup
Installation
1. MOUNT the WSS using the included mounting ring or in a standard plastic or
metal electrical gang box, as applicable, and depending on the type of door
installation.
NOTE 1:
The weather resistant foam is used as a protective barrier against
the elements.
NOTE 2:
The plastic adapter ring enables the double gang face plate to
attach to various plastic and metal gang boxes.
NOTE 3:
If using a metal electrical box, do not allow contact between the sensor
and the box to prevent shorting the device.
2. ENSURE placement of the device so that motion from the door or other types of
movement do not interfere with the detection zone.
Wiring
1. WIRE the four-conductor cable as shown below.
