background image

of 4

Patent pending and/or patent www.assaabloydss.com/patents

Copyright © 2020, Hanchett Entry Systems, Inc., an ASSA 

ABLOY Group company. All rights reserved. Reproduction in 

whole or in part without the express written permission of 

Hanchett Entry Systems, Inc. is prohibited. 500-12600_7

[email protected] | 800 626 7590
assaabloyesh.com
10027 S. 51

st

 Street, Ste. 102 Phoenix, AZ 85044 USA

of 4

Changing the Alternate Lens  

on the Securitron EEB3N

1. 

While holding keyplate, GRASP the top and bottom of 

the lens and PULL straight out from the keyplate.

2. 

PLACE a new lens over the switch face, and ENSURE the 

text on the lens is correctly reading to the keyplate.

3. 

PRESS completely until it snaps into place.

4. 

DEPRESS the lens several time to ensure smooth 

operation and the lens is not binding.

Alternate 

Lens

Warranty

For information on warranty coverage and replacement 

options, please visit 

assaabloyesh.com/warranty

Summary of Contents for Securitron EEB2

Page 1: ...gger starting a new 30 second lock release period These buttons are specifically intended for installation on access controlled egress doors as described in the International Building Code IBC Check your jurisdiction for applicable IBC codes A motion detector such as the Securitron Model XMS is the primary means of magnetic lock release on the door The Securitron EEB2 or EEB3N exit button is emplo...

Page 2: ...on EEB2 and EEB3N draw no current when at rest and only draw 28 mA at 12 VDC or 38 mA at 24VDC when releasing the lock 1 WIRE the Securitron EEB2 or EEB3N in accordance with Diagram 1 2 and 3 CAUTION The Securitron EEB2 and EEB3N can be damaged if operated on 24 VDC with the jumper in place or operated on a power supply different than what is operating the magnetic lock Red 12 V or 24 V 0 V DC Neg...

Page 3: ...rt onto the front of switch 7 ENSURE that the text on the insert is correctly reading to the keyplate and PLACE the matching color lens on top of insert 8 PRESS around all edges of the lens until it snaps in place 9 DEPRESS lens several times to ensure smooth operation and the lens is not binding 10 With the terminals upward INSERT the contact block back into the back of the switch at the 11 00 o ...

Page 4: ...reet Ste 102 Phoenix AZ 85044 USA 4 of 4 Changing the Alternate Lens on the Securitron EEB3N 1 While holding keyplate GRASP the top and bottom of the lens and PULL straight out from the keyplate 2 PLACE a new lens over the switch face and ENSURE the text on the lens is correctly reading to the keyplate 3 PRESS completely until it snaps into place 4 DEPRESS the lens several time to ensure smooth op...

Reviews: