16
Multi-Point Lock
Installation Instructions
FM7300 Series and BL7300 Series
A8220D 04/20
Copyright © 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in
part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
4
Optional Installation (cont.)
a
Dogging Indicator Installation (cont.)
Install the indicator on the inside of the door using supplied 10-24 x 2" oval head screws. Make sure the
control fingers grab the top rod pin as shown.
(Figure 32)
Figure 32
Side View
Pin
Control Fingers
Check for proper operation. Rotate the lever until the indicator window shows a single latch point.
(Figure 33)
Figure 33
Single Latch
Point
3-Latch
Points
Indicator
Window
Note:
To dog the top and bottom latches in a retracted state, fully rotate the lever and move the slider on the
indicator to the left.
