5
BHL Freewheeling Trim Retrofit
Installation Instructions
8200 Series
A8259A 07/19
Copyright © 2019, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or
in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
d
Assemble Outside Adapter Plate and Rose
• Insert two (2) mounting posts into adapter plate. (Figure 6)
• Install rose using four (4) security torx screws.
Note:
Tighten screws evenly.
(4) Security
Torx Screws
Rose Assembly
Adapter and Plate Assembly
with Mounting Posts
LH/LHR Outside Shown
RH/RHR Outside Shown
Figure 6
4
Installation
a
Install Adapter Clutch
Install adapter clutch into
mortise lock hub. (Figure 7)
Note:
Adapter clutch is oriented toward
latchbolt as shown.
b
Install Outside Lever Assembly
Use outside bushing and spindle to connect rose/adapter plate assembly to outside lever
assembly. (Figure 8)
Figure 7
81-0794
Adapter Clutch
Hinge Side
Hinge Side
Figure 8
Bushing
(Outside)
Rose/Adapter Plate Assembly
Align rose screw with gap in spring cartridge
Outside Lever Assembly
81-0790 Spindle
Apply grease to
these surfaces
