Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9372-0100-015 (02-14)
ASSA ABLOY
RI X SON
®
8
Closer Mounting
3
Closer Mounting
4
Arm Mounting
5
c
Install remaining
mounting screws
through back plate
and tighten all four
screws (d). Pull
wiring through holes
(if concealed wired).
d
Fully close Latch & Sweep
Valves with 1/8" wrench
provided.
Mount closer arm to pinion square as shown.
Use main arm to rotate pinion
until flat is visible.
RE-INSTALL
HERE
LEFT
HAND
RIGHT
HAND
Attach with provided
screw and washer.
Tighten arm screw with
5/32" hex wrench.
Attach Arm
3
6
PINION
FLAT
LEFT
HAND
RIGHT
HAND
Align the pinion
flat
as
shown.
!
*All views from floor looking upward*
C
C
Hang closer body
by key hole slots (b)
and slide closer toward
hinge to capture screw
heads (c).
Warning: Do not allow
pedestrian traffic
through opening until
all mounting screws
are tightened.
*For Connected Free Swing Arm
see Instructions 80-9372-0101-000*
For Concealed Wired Only
(If surface wired, see page 13-15)
!
b
