Copyright © 2017-2022, ASSA ABLOY Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Inc. is prohibited.
38
• Periodically check the fasteners. The fasteners must not be loose. If the fasteners are loose, reapply threadlocker and tighten as necessary.
Finish Code
Finish
Cleaning Instructions
US32
Polished Stainless Steel
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S.C. Johnson
Company.
US32D
Satin Stainless Steel
Use a soft cloth and a good metal cleaner. We recommend Mr. Metal by S.C. Johnson
Company.
US32DMS
Satin MicroShield Coated
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
US32MS
Polished MicroShield Coated
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
10BE
Oxidized & Oiled Bronze
Powder Coat Equivalent
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
RPC
Red Powder Coat
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
WPC
White Powder Coat
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
BPC
Black Powder Coat
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
FBPC
Flat Black Powder Coat
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
CUSTOM PC
Custom Powder Coat
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
314E
Powder Coat Equivalent of 314
Extra Dark Bronze Anodized
Use a soft cloth and mild soap and water. Never use brass polish or an abrasive
cleaner unless you intend to remove all clear coat and totally refinish the product.
• CAUTION: Before you clean the entire Panic Device Assembly, clean a small test area to make sure that you are satisfied with the results.
• Frequent cleaning extends the life of all finishes.
General Maintenance Instructions
6.1
Finish Cleaning Instructions
6.2
6. Cleaning and Maintenance
