4. INSTALL the Shaft Extension.
4a. IF the cabinet door thickness is greater than ½”,
THEN INSTALL the Shaft Extension to the Antenna/Reader to ensure proper engagement into the lock.
4b. INSTALL the Shaft Extension to the shaft as shown
in the figure and firmly TIGHTEN the screw.
Door
Thickness
Extension
Shaft Used?
1/16” – ½”
No
> ½” – 1 ½”
Yes
5. IF a Cam Lock Key Override will be used, AND the orientation allows for
installation, THEN INSTALL the Key Override Paddle.
5a. INSERT the Paddle’s arm into the opening shown, and ALIGN the rails of the paddle to the ones on the
lock.
5b. SLIDE the paddle
gently until it stops.
6. PREPARE the Key Override Door.
NOTE: The Cam Lock is optional and must
be obtained by others.
6a. IF a Key Override is used,
THEN USE template to mark and drill a
hole for a 3/4” Cam Lock in the door.
Shaft Extension
2-56 X 1-¼” screw
(provided)
Table 1
5b
6a
6b. INSTALL the optional Cam Lock with
the cabinet lock as shown in the
figure.
6b
5a
3080076.004, Rev. B
8
