Lock Body
Installation
1.
INSERT reader cable through
hole in back of lock body.
2.
ALIGN lock body to mounting
holes and secure to cabinet/
drawer face using
2x screw
f
and
2x screw d
. DO NOT
over tighten. If required use
Screw
e
or
g,
instead of
f
.
3.
PLUG cable into slot on lock body.
4.
Tuck excess cable into lock body
cavity as shown in
Diagram 9
.
5.
For cabinet/drawer face thicker
than 1/2", add a third
Screw d
as shown in
Diagram 10
.
Diagram 8:
Step 1 & 2
Diagram 9:
Step 3 & 4
Diagram 10:
Step 5
7
of 12