40
EN
Maintenance, warranty, disposal
Maintenance
The
Technilock
®
L4
is maintenance-free. The sliding surfaces are permanently greased.
Impor tant!
Do not spray any lubricants into the
Technilock
®
L4
:
The inside of the
Technilock
®
L4
may not be greased.
Only lubricate the edges of the striking plate according to the instructions below.
Lubrication schedule
The striking plate must be lubricated every 100,000 operating cycles.
Use the following grease:
Trade name:
ISOFLEX TOPAS NB 52
Part no:
004131
Manufacturer:
Klüber Lubrication München KG
Geisenhausener Straße 7
D-81379
München
Telephone:
0049 (0)89 7876 - 0
Fax:
0049 (0)89 7876 - 333
Email: [email protected]
Lubricating the striking plate
1
Open the door.
2
Grease the inner edges of the striking plate opening (in the figure
A
)).
Subsequent lubrication is only necessary with the “fail-locked” product variant.
3
Grease the angled edges of the striking plate (in the figure
B
).
Warranty
The legal warranty periods and the Terms and Conditions of Sale and Delivery of
ASSA ABLOY Sicherheits-
technik GmbH
(www.assaabloy.de) apply.
Disposal
Packaging materials must be recycled.
The product is to be disposed of with electronic waste.
The applicable environmental protection regulations must be complied with.
A
Order recommended
grease
M
Maintenance, warranty, disposal
Summary of Contents for Effeff Technilock 844L4 EHE
Page 82: ...82 IT Problema causa soluzione...
Page 83: ...83 IT...
