SE LP10 ML20600 Mortise Lock
13
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
7) Installation Instructions (Continued)
Check polarity:
(red) wire
Please note that the lock must be electrically cycled once in order for setting changes to
take effect.
*RX output only configurable for locks
with end-of-line resistance monitoring.
Default is normally open (NO).
Fig. 4a
Fig. 4a
Fig. 4b
4. Configuring the Fail Safe/Fail Secure and RX* DIP switch settings:
