13
SE LP10 CL33600 Cylindrical Lock
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All
rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1. Fit trim bezel around the reader. Ensure access hole in the bezel aligns with screw hole on
reader. The reader should be mounted so holes face bottom of door (Fig 4b).
2. Align top of reader with top of backplate. Pivot the reader down until seated. Guide wires
as needed to avoid pinching.
3. Secure the reader with (1) #6-32 x 3/8” Phillips or anti-tamper security torx screw to the
mounting plate (Fig 4c).
7) Installation Instructions (Continued)
4. Install SE LP10 Reader and Trimi Bezel (Continued):
Fig. 4c
Trim Bezel
Reader
Outside of
Door
Detail
Torx
security
screw
Fig. 4b
