9
Installation Instructions
Exit Devices
FM572 10/22
Copyright © 2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
ED2400 & ED2400(A) Series Surface Vertical Rod
Figure 8
3
Preparation, continued
d
Clear Raised Door Molding
Device must seat flush on door surface or on
the shims that keep it parallel to door face.
(Figure 8)
Longer mounting screws are needed when
more than (2) shims of 1/8” thick are used.
See Shim Kit Option in Step 2e.
(1) Shim Kit #867F508
per 1/4" (6 mm) of raised molding
e
Size Device
LHR Door Open 90 Inside Face (Figure 9)
Figure 9
