4
80-9360-6004-152 04/18
DC6200 & DC6400 Series Closers
Installation Instructions
A10 Heavy Duty Non-Hold Open Arm
Copyright © 2018 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
2
Installation
2. Install Closer Bracket. (Figure 3)
Figure 3
MAIN ARM
Pin Hole
End
Countersunk
Holes
NOTE ARMS WILL
FORM A “V” POSITION
Rotate
approximately
5°
1/4-20 x 1/2 OHMS (2)
Pins
(2)
3. Mount Closer Body to Closer Bracket.
(Figure 4)
Figure 4
1/4-14 x 1-1/2
OH Self-Drilling (4)
or
1/4-20 x 3/4 OHMS w/Sex
Nuts (4) (M54 Option)
MAIN ARM
Pin Hole
End
Countersunk
Holes
NOTE ARMS WILL
FORM A “V” POSITION
Rotate
approximately
5°
1/4-20 x 1/2 OHMS (2)
Pins
(2)
