Corbin Russwin is a brand associated with ASSA ABLOY Access and Egress Hardware Group, Inc., an ASSA ABLOY Group company.
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part
without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Corbin Russwin, Inc.
225 Episcopal Road
Berlin, CT 06037 USA
Phone: 800-543-3658
Fax: 800-447-6714
www.corbinrusswin.com
FM489 04/20
e
Install Indicator
Install indicator on inside of door with supplied 10-24 x 2” oval head screws. Make sure that control
fingers grab top rod pin. (Figure 4)
Figure 4
Side View
Pin
Control Fingers
Front View
f
Check for Proper Operation
Rotate lever until indicator window shows a single latch point. (Figure 5)
Figure 5
Indicator Window
Single Latch
Point
3-Latch
Points
Note
To dog top and bottom latches in retracted state, fully rotate lever and move slider on indicator
to left.
