3
Dogging Indicator (AUX188)
Installation Instructions
FE6600 and MP6600 Series
FM489 04/20
Copyright © 2020, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
1
Dogging Indicator
a
Latch Door
Ensure door is latched and all bolts are projected.
b
Place Template
Place plastic field template on pin in top rod through oval cut-out in door. (Figure 1)
Figure 1
Front View
Side View
Pin
c
Drill Holes
Using a #7 drill bit, drill two (2) holes completely through door, making sure drill remains square to face
of door. (Figure 2)
Figure 2
d
Countersink Holes
Countersink holes on opposite face of door to fit supplied oval head
screws. (Figure 3)
Figure 3
