10
CL33600 Series Cylindrical Lock
Copyright © 2017 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
7) Installation Instructions (Continued)
Fig. 5a
Fig. 5b
Outside Face of Door
5.
Installing Lock
- Feed lock body and wire through 2-1/8” diameter hole from outside of door (Fig. 5a).
Be sure latch engages lock body as shown (Fig. 5b):
Important: Door must remain open during installation.
Use door stop
6.
Install Inside Spring Cassette:
a. Feed lock body wires and cassette (REX) wires in slot on face of door (Fig. 6a)
Note: Be careful to keep wires in slot cut into door.
b. Tightening using two #12-24 screws.
Note: DO NOT PINCH wires when tightening.
Fig. 6a
Fig. 6b
Inside Face of Door
Keep wires in slot:
DO NOT pinch under
Spring Cassette
Lock Body Wires
REX Wires
Ground Wire
Spring Cassette
Summary of Contents for Corbin Russwin Access 600 CL33600 TCRNE1 Series
Page 2: ......
