background image

 

Logistic Security Solutions

 

 

pg. 9

 

Biometric Wristband – User Manual – BWB01 

8

 

General info and specifications 

8.1

 

Sensors 

The Wristband includes a fingerprint sensor for biometric verification and activation from standby. It 
has an accelerometer for detection of movements. 

8.2

 

Materials 

The strap that comes with the Wristband is made of Nitrile rubber (NBR), a durable form of synthetic 
rubber that is generally resistant to oil, fuel, and other chemicals. The sealing is made of glass fiber 
reinforced polycarbonate. 

8.3

 

Wireless Technology 

The Wristband includes a Bluetooth 4.2 radio transceiver. 

8.4

 

Haptic feedback 

The Wristband includes a vibration motor for feedback and notifications. 

8.5

 

Battery 

The Wristband includes a rechargeable Li-ion battery with a capacity of 200 mAh. The battery will 
support the Wristband up to 168 hours (one week) in standby mode, and more than 30 lock openings 
during a 12-hour period. 

The Wristband must be charged using the supplied charger. The maximum charging temperature is 
+60 C. 

The built-in battery cannot be replaced. A device that cannot be charged should be sent back to the 
manufacturer or be subject for electronic recycling according to local regulations. 

8.6

 

Memory 

The Wristband stores delegated digital keys for a given validity period. It stores an audit trail of usage 
digital keys that are periodically synced with the Service Backend. 

8.7

 

Operating Conditions 

The Wristband is designed to be used outdoors in all weather conditions. With IP-code 67 and 
temperatures ranging from -40 to +60 C. 

The Wristband with the built-in non-replaceable battery needs to be handled with care: 

1)

 

Disposals of the device into fire or a hot oven, or mechanically crushing or cutting the built-in 
battery, can result in an explosion. 

2)

 

Leaving a device with a battery in an extremely high temperature surrounding environment 
may result in an explosion or the leakage of flammable liquid or gas. 

3)

 

A device with a battery subjected to extremely low air pressure may result in an explosion or 
the leakage of flammable liquid or gas. 

 

 

 

Summary of Contents for BWB01











Reviews: