background image

 

Logistic Security Solutions

 

 

pg. 5

 

Biometric Wristband – User Manual – BWB01 

3

 

Setting up your Wristband 

In order to be used to receive digital keys and open locks, Wristbands must  

1)

 

Be deployed for the user’s organization account 

2)

 

Be assigned by the account administrator to a particular user.  

3.1

 

Deployment of new Wristbands 

New Wristbands are delivered to customers in virgin mode and must first be registered for an 
account by an authenticated account administrator. The administrator will use the Wristband 
Connect smartphone app to claim ownership of new Wristbands which will enable them for 
assignment. 

The next step is to make them operational for users. 

3.2

 

Assign Wristband to User 

Authenticated account administrators using the Wristband Connect app can select a Wristband for a 
user and initiate an assignment process. This process includes storing name and user id in the Service 
Backend, and enrollment of two finger prints for biometric identification. 

1)

 

Account admin selects a Wristband in the Wristband Connect app. 

2)

 

The Wristband must be placed within Bluetooth range from the smartphone. 

3)

 

Provide name and user id for the user. The required user id is used to connect the requested 
digital keys to a particular user. 

4)

 

The Account admin initiates the assignment process using the app. 

5)

 

The Wristband picks up that an assignment is pending and starts the finger print enrollment 
process.  

6)

 

Completion of the enrollment requires 5 successful finger prints per finger. If a scan fails, try 
again. 

a.

 

Waiting for next finger: 5 yellow blinks 

b.

 

Fingerprint accepted: 1 green blink, short vibration 

c.

 

Fingerprint failed: 3 red blink, long vibration 

d.

 

Full enrollment sequence completed: 10 green blinks 

e.

 

Enrollment sequence failed: 10 red blinks 

7)

 

With the full enrollment sequence completed, the Wristband is operational and ready to be 
used with digital keys.  

a.

 

Note that the user must have the Wristband Connect app installed to enable sync 
with Service Backend. See section below about installation of Wristband Connect. 

3.3

 

Re-assign Wristband to new user 

A Wristband that has already been assigned to a user can be re-assigned to another user.  

1)

 

Account admin selects a Wristband in the Wristband Connect app. 

2)

 

Place the Wristband within Bluetooth range from the smartphone. 

3)

 

Account admin clears currently assigned user from the Wristband from the app.  

a.

 

The Wristband is now ready for a new assignment, following the procedure 
described above. 

Note: This method must also be used if a user needs to enroll another finger for improved biometric 
identification. 

 

Summary of Contents for BWB01











Reviews: