Assa AB 702027 Edition 2
Page 1 of 6
Mounting instruction
Panic exit device Assa 1125
This mounting instruction is intended for installation of panic exit device Assa 1125 with
following ordering numbers: 810700, 810701, 810702, 815697, 815698 and 815699.
Warning!
The safety features of this product are essential to its compliance with EN 1125.
No modification of any kind, other than those described in these instructions, are permitted.
Assa takes no responsibility for products not mounted as described in these instructions or if
enclosed maintenance and operating instruction not are followed.
In compliance with EN 1125 the Assa 1125 is intended for use on single doors with following
size:
Product
Ordering
number
Max width of
door
Max height of
door
Max weight
of door
1125/1525 M8
810700
670-815 mm
2500 mm
100 kg
1125/1525 M9-M10
810701
816-1010 mm
2500 mm
100 kg
1125/1525 M11-M13
810702
1011-1300 mm
2500 mm
100 kg
1125/1526 M8
815697
670-815 mm
2500 mm
100 kg
1125/1526 M9-M10
815698
816-1010 mm
2500 mm
100 kg
1125/1526 M11-M13
815699
1011-1300 mm
2500 mm
100 kg
Assa 1125 must be installed together with Assas strike plate model 1887 with following
ordering numbers: 353355, 353356, 353357 and 353358.
Assa 1125 can be installed together with following outside modular profile accessories:
- Accessory set Assa 3325, ordering no 354565, including outside round cylinder cover and
handle.
- Accessory set Assa 3425, ordering no 354564, including outside round cylinder cover and
cover plate for handle position.
