Assa Abloy 1048.10 Mounting & Installation Download Page 11

11

General description

The compact locking units 1048.10 and 1048.10 RR have especially been
developed for the locking of furniture. They can be used instead of usual me-
chanical lockings or additionally as an access control system and prevent un-
authorized access to valuables or certain documents. The compact locking
units can be used for locking filing cabinets, fitted cupboards, drawers, post-
office boxes / safe-deposit boxes, letter boxes and glass cabinets, for exam-
ple. 
The compact locking units 1048.10 and 1048.10 RR are exclusively designed
for fail-locked operation. The most simple way to operate the access control
system is by means of a key switch. If it is necessary to electronically control,
register and monitor the access control system, the compact locking unit can
be combined with a code or card reader system. 
When unlocking, the rosette installed as a counter unit is automatically pushed
out of the locking element and the door is slightly opened. This is an advan-
tage especially with regard to post-office boxes / safe-deposit boxes as these
boxes do not have any handle for opening.
The RR version additionally incorporates a change-over contact for monitoring
the state of the door (open/closed).

Fail-locked operation:

The compact locking unit is exclusively designed for fail-locked operation and
must therefore be energized for opening.

Note:
In the event of power failure unlocking is impossible and consequently
the door cannot be opened.

Functional characteristics:

The compact locking unit 1048.10/1048.10 RR consists of two parts. Part 1 is
the locking element which is, for example, mounted laterally to a post-office
box / safe-deposit box. Part 2 is the rosette which is installed at the door. 

When the door is closed, the locking bolt
of the rosette engages the locking ele-
ment and the box is locked. If the box
must be opened, the locking element
must be unlocked electrically first.

According to the requirements, the lock-
ing element can be installed for front or
top engagement of the rosette (see illus-
tration 1)

Locking element                     rosette

illustration 2: locking principle

Summary of Contents for 1048.10

















Reviews: