ASROCK Z97 Extreme9 User Manual Download Page 9

Page: 9 / 125

English

Z97 Extreme9

Graphics

•

Intel® HD Graphics Built-in Visuals and the VGA outputs
can be supported only with processors which are GPU
integrated.

•

Supports Intel® HD Graphics Built-in Visuals : Intel® Quick
Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTru

3D, Intel® Clear Video HD

Technology, Intel® Insider

, Intel® HD Graphics 4400/4600

•

Pixel Shader 5.0, DirectX 11.1

•

Max. shared memory 1792MB

•

Dual graphics output: Support HDMI and DiaplayPort 1.2
ports by independent display controllers

•

Supports HDMI with max. resolution up to 4K x 2K
(4096x2304) @ 24Hz

•

Supports DisplayPort 1.2 with max. resolution up to 4K x 2K
(4096x2304) @ 24Hz or 4K x 2K (3840x2160) @ 60Hz

•

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)

•

Supports HDCP with HDMI and DisplayPort 1.2 Ports

•

Supports Full HD 1080p Blu-ray (BD) playback with HDMI
and DisplayPort 1.2 Ports

Audio

•

7.1 CH HD Audio with Content Protection (Realtek
ALC1150 Audio Codec)

•

Premium Blu-ray Audio support

•

Supports Surge Protection (ASRock Full Spike Protection)

•

Supports Purity Sound

- Nichicon Fine Gold Series Audio Caps
- 115dB SNR DAC with Differential Amplifier
- TI® NE5532 Premium Headset Amplifier (Supports up to
600 Ohms headsets)
- Direct Drive Technology
- EMI Shielding Cover
- PCB Isolate Shielding

•

Supports DTS Connect

Summary of Contents for Z97 Extreme9






























































































































Search results

Summary of Contents for Z97 Extreme9

Reviews:

Related manuals for Z97 Extreme9

Brands by name

Popular brands

ASROCK Z97 Extreme9, User Manual

Search results

Summary of Contents for Z97 Extreme9

Reviews:

Related manuals for Z97 Extreme9

Brands by name

Popular brands