manualshive.com logo in svg

ASROCK Z97 Extreme9, User Manual

Share
Download
ASROCK Z97 Extreme9 User Manual Download Page 7

1

English

Z97 Extreme9

Chapter  1  Introduction

Thank you for purchasing ASRock Z97 Extreme9 motherboard, a reliable 
motherboard produced under ASRock’s consistently stringent quality control. 
It delivers excellent performance with robust design conforming to ASRock’s 
commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the 
motherboard and step-by-step installation guides. Chapter 3 contains the operation 
guide of the software and utilities. Chapter 4 contains the configuration guide of 
the BIOS setup.

1.1  Package Contents

• 

ASRock Z97 Extreme9 Motherboard (ATX Form Factor)

• 

ASRock Z97 Extreme9 Quick Installation Guide 

• 

ASRock Z97 Extreme9 Support CD  

• 

1 x I/O Panel Shield 

• 

2 x ASRock SLI_Bridge Cards

• 

1 x ASRock SLI_Bridge_3S Card 

• 

1 x ASRock 3-Way SLI Bridge Card

• 

4 x Serial ATA (SATA) Data Cables (Optional)

• 

1 x HDD Saver Cable

• 

2 x Screws for M.2 Sockets  

• 

1 x Screw for mini-PCIe Slot

Because the motherboard specifications and the BIOS software might be updated, the 
content of this documentation will be subject to change without notice. In case any 
modifications of this documentation occur, the updated version will be available on 
ASRock’s website without further notice. If you require technical support related to 
this motherboard, please visit our website for specific information about the model 
you are using. You may find the latest VGA cards and CPU support list on ASRock’s 
website as well. ASRock website  http://www.asrock.com.

Summary of Contents for Z97 Extreme9






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands