ASROCK Z590 PRO4 / Z590M PRO4 Install guide.
First assemble the computer parts.
For ease of use during Windows installation, Merging recommends that you install security dongles, NET-MSC GBEX1, MT-USBSync board and Pyramix-
Ovation keyboard after the Windows Installation.
Please make sure your Windows and Pyramix-Ovation-VCube versions are compatible, see this page for details.
Merging highly recommends you "defer feature updates" in Windows 10.
1.2.1 CPU Configuration
1.2.2 DRAM Configuration
1.2.3 Voltage Configuration
1.3.1 CPU Configuration
1.3.2 Chipset Configuration
1.3.3 Storage Configuration
1.3.4 Intel® Thunderbolt
1.3.5 Super I/O Configuration
1.3.6 ACPI Configuration
1.3.7 USB Configuration
1.3.8 Trusted Computing
1.3.9 UEFI Configuration
1.5. H/W Monitor
1.6. Security
1.7 Boot
1.8 Saving your BIOS/UEFI settings
RAID Installation notes
2.WINDOWS INSTALLATION
3.WINDOWS CONFIGURATION
4.SOFTWARE INSTALLATION
4.1 INSTALL PYRAMIX / OVATION / VCUBE
1.BIOS
Validated BIOS version :
Z590 PRO4 : 1.50 / 1.60
Z590M PRO4 : 1.60
Please consult
for other BIOS support.
First update BIOS if required.
!Merging Technologies does not guarantee any issue or instability if any overclocking is enabled!
Sealevel GPIO 8206 & 8206FX are NOT compatible with this motherboard, because of their incompatibility with Intel USB chipsets.
Other SeaLevel GPIO are compatible, see our
for details on supported models.
BIOS first opens in the EZ mode page, a summary of the system information.
You may adjust date and time.
Please switch to Advance Mode (F6)
1.1. Main page
System information only.
1.2. OC Tweaker
When updating the BIOS, all settings are lost or not set correctly, you have to enter all the parameters again manually.
Merging recommends you unplug all drives before updating BIOS.
Merging Technologies will not be hold responsible for any trouble or error during a BIOS update.
