:
if you use a separate graphic card (recommended - only displayed if your CPU supports this feature)
Primary Graphics Adapter PCI Express
:
Above 4G Decoding Disabled
VT-d: Enabled
SR-IOV Support: Disabled
DMI Link Speed : Gen3
:
PCIE1 to PCIE5 Link Speed Auto
:
PCI Express Native Control Disabled
:
PCIE ASPM Support Disabled
:
PCH PCIE ASPM Support Disabled
:
DMI ASPM Support Disabled
:
PCH DMI ASPM Support Disabled
: Memory allowed to the onboard graphics.
for dedicated graphic card. (set to 1024M if you use onboard graphics)
Share Memory
Auto
:
IGPU Multi-Monitor Disabled
:
Realtek 2.5G Ethernet Controller Enabled
:
Onboard HD Audio Auto
:
Front Panel HD HD
:
Onboard WAN Device Disabled
:
Deep Sleep Disabled
: set it to
if you want the system to restart after a power failure.
Restore on AC/Power Loss
Power On
:
Turn on Onboard LED in S5 Disabled
Restore on Onboard LED Default: Disabled
Off
RGB LED:
1.3.3 Storage Configuration
:
SATA Controller Enabled
AHCI / Intel RST Premium (RAID)
SATA Mode Selection:
If you plan to use RAID array, you should install Windows with this setting set to Intel RST Premium (RAID), even if your system drive will not be in
the RAID Array.
You will need to add the RAID driver on your installation media, download it from the manufacturer website or use the Easy RAID installer feature
(see 1.4.3 below)
PMX V11/ Ovation V7 to PMX25th Hotfix2 / Ovation 9.0.5, MassCore users running a RAID configuration must use a dedicated RTX
WARNING:
dongle (SSK-HUD-RTX) to authorize MassCore.
This issue only affects the system (Windows ) RAID drives, if you have RAID Data drives, a dedicated dongle is not required.
Since PMX25th Hotfix3 / Ovation 9.0.6, the RTX dongle SSK-HUD-RTX is no longer mandatory.
To configure your RAID array, please see the RAID Installation notes below.
:
SATA Aggressive Link Power Management Disabled
:
Hard Disk S.M.A.R.T. Enabled
:
SATA_0 to 5
: enable if the drive uses eSATA (External Drives for example).
External SATA
: enable if you need Hot-Plug capability (Drive trays for example).
Hot plug
: set to Solid State Drive or Hard Disk Drive
SATA device type
1.3.4 Intel® Thunderbolt
:
Discrete Thunderbolt(TM) Support Disabled
1.3.5 Super I/O Configuration
:
PS2 Y-Cable Auto
1.3.6 ACPI Configuration
:
Suspend to RAM Disabled
:
PS/2 Keyboard S4/S5 Wakeup Support Disabled
:
PCIE Devices Power On Disabled
RTC Alarm Power On: By OS
:
USB Keyboard / Remote Power On Disabled
:
USB Mouse Power On Disabled
1.3.7 USB Configuration
:
Legacy USB Support Enabled (if set to disable, no USB Support until OS is booted)
:
XHCI Hand-off Disabled
: all should be set to
USB Single port Control
Enabled
1.3.8 Trusted Computing
