ASROCK X299 GAMING i9 User Manual Download Page 92

Page: 92 / 113

English

4.6.1 CPU Configuration

Intel Hyper Threading Technology

Intel Hyper Threading Technology allows multiple threads to run on each core, so that the
overall performance on threaded software is improved.

Active Processor Cores

Select the number of cores to enable in each processor package.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6
and C7 all enabled for better power saving.

Processor Hot Modes

Use this item to configure the processor Hot Modes for CPU throttling. When
a processor thermal sensor trips (either core), the PROCHOT# will be driven. If
bi-directional is enabled, external agents can drive PROCHOT# to throttle the
processor.

CPU Thermal Throttling

Enable CPU internal thermal control mechanisms to keep the CPU from overheat-
ing.

Summary of Contents for X299 GAMING i9


















































































































Search results

Summary of Contents for X299 GAMING i9

Reviews:

Related manuals for X299 GAMING i9

Brands by name

Popular brands

ASROCK X299 GAMING i9, User Manual

Search results

Summary of Contents for X299 GAMING i9

Reviews:

Related manuals for X299 GAMING i9

Brands by name

Popular brands