ASROCK X299 GAMING i9 User Manual Download Page 96

Page: 96 / 113

English

4.6.3 Storage Configuration

SATA Controller(s)

Enable/disable the SATA controllers.

SATA Controller Speed

Indicates the maximum speed the SATA controller can support.

SATA Mode Selection

[AHCI]: Supports new features that improve performance.

[RAID]: Combine multiple disk drives into a logical unit.

Alternate ID

Alternate ID allows you to enable or disable the report for the alternate device ID.

[Enabled]: Enable the RSTe (Rapid Storage Technology enterprise) feature.
[Disabled]: Enable the RST (Rapid Storage Technology) feature.

*Please note that if you install CPU with 44 lanes or 28 lanes, RSTe does not support
PCH PCIe NVME and VROC (Intel® Virtual RAID on CPU) is supported.

Summary of Contents for X299 GAMING i9


















































































































Search results

Summary of Contents for X299 GAMING i9

Reviews:

Related manuals for X299 GAMING i9

Brands by name

Popular brands

ASROCK X299 GAMING i9, User Manual

Search results

Summary of Contents for X299 GAMING i9

Reviews:

Related manuals for X299 GAMING i9

Brands by name

Popular brands