ASROCK X299 Designer+, Manual

Page: 31 / 100

English
29
X299 D
Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 15) Please connect the
chassis power LED and
the chassis speaker to this
header.
Serial ATA3 Connectors
(SATA3_0_1:
see p.1, No. 11)
(SATA3_2_3:
see p.1, No. 12)
(SATA3_4_5:
see p.1, No. 13)
(SATA3_6_7:
see p.1, No. 14) These eight SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_0 will be disabled.
* If M2_2 is occupied by
a SATA-type M.2 device,
SATA3_1 will be disabled.
* If M2_3 is occupied by
a SATA-type M.2 device,
SATA3_4 and SATA3_5
will be disabled.
* If M2_3 is occupied by
a PCIe-type M.2 device,
SATA3_4, SATA3_5,
SATA3_6 and SATA3_7
will be disabled.
USB 2.0 Headers
(9-pin USB_5_6)
(see p.1, No. 21)
(9-pin USB_7_8)
(see p.1, No. 20)
(9-pin USB_9_10)
(see p.1, No. 19) There are three headers
on this motherboard.
Each USB 2.0 header can
support two ports.
1
+5V
DUMMY
PLED+
PLED+
PLED-
DUMMY
SPEAKER
SA
TA3_2
SA
TA3_3
SA
TA3_4
SA
TA3_5
SA
TA3_6
SA
TA3_7
SA
TA3_0
SA
TA3_1
DUMMY
GND
GND
P+
P-
USB_PWR
P+
P-
USB_PWR
1