WRX80D8-2T
WRX80D8-NL
50
51
English
OCU2 Mode Selection
This allows you to configure OCU2 PCIE(x4)/OCU2_SATA(0-3) Mode.
Onboard Debug Port LED
Enable or disable the onboard Dr. Debug LED.
Restore AC Power Loss
Select the power state after a power failure. If [Power Off] is selected, the power will remain
off when the power recovers. If [Power On] is selected, the system will start to boot up
when the power recovers.
Restore AC Power Current State
This allows you to restore AC Power Current State.