5
6. Place your motherboard to the chassis.
7. Connect the cable-end from the antennas to the antenna ports on ASRock
WiFi-802.11n module.
8. Place the antennas at an elevated location. A wide and open position will enhance
the operating range.
Note:
* You may connect two antennas to ASRock WiFi-802.11n module. However, please place
the two antennas apart for a distance of at least 50cm and put them on different elevation of
height to avoid interference of each others.
2.3. Driver and Utility Installation
After you finish the hardware installation, you need to install WiFi driver and utility
to your system. Please boot your system and follow below steps to install the WiFi
driver and utility.
1. Insert ASRock motherboard support CD to the optical drive.
2. The system will automatically display the driver menu. Click “ASRock
WiFi-802.11n Driver and Utility” and follow screen instructions to finish the driver
installation.
After above steps, the WiFi driver and utility are installed to your system
simultaneously.
Note:
* Microsoft
®
had released a hotfix to improve the connectivity and performance of wireless
network in Windows
®
Vista-based system. To download the hotfix, please go to:
http://support.microsoft.com/kb/928152/en-us
* Microsoft
®
had also released three hotfix to improve the connectivity for transferring large
file in Windows
®
Vista-based system. Please go to:
z
http://support.microsoft.com/kb/932045/en-us
to download the necessary hotfix when this
