V1.0 Vig103M Motherboard Manual
17
Chapter 2: System Board Options
The Vig103M motherboard supports Intel® Core i3, i5, i7 and Celeron® and Pentium®
processors in the LGA1151 socket. RAM can be upgraded to a maximum of 32GB using
DDR4 2133 Non-ECC, un-buffered DIMMs.
WARNING!
Unplug the system before carrying out the procedures described in this chapter.
Failure to disconnect power before you open the system can result in personal
injury or equipment damage. Hazardous voltage, current, and energy levels are
present in this product. Power switch terminals can have hazardous Voltages
present even when the power switch is off.
The procedures assume familiarity with the general terminology associated with
personal computers and with the safety practices and regulatory compliance
required for using and modifying electronic equipment.
Do not operate the system with the cover removed. Always replace the cover
before turning on the system.
As the colours of the wires in the mains lead of this computer may not correspond with the
coloured markings identifying the terminals in your plug precede as follows:
The wire which is coloured
green-and-yellow
must be
connected
to the
terminal
in the plug
which is marked by the letter
E
or by the safety Earth symbol
Q
or coloured green or
green-
and-yellow
.
The wire which is coloured blue must be connected to the terminal which is marked with the
letter
N
or coloured
black
.
The wire which is coloured brown must be connected to the terminal which is marked with the
letter
L
or coloured
red
.
CAUTION!
The Viglen Vig103M motherboard
and associated components are
sensitive electronic devices. A small
static shock from your body can
cause expensive damage to your
equipment.
