ASROCK Q87M vPro User Manual Download Page 75

Page: 75 / 95

English

4.4.3 Storage Coniguration

SATA Controller(s)

Enable/disable the SATA controllers.

SATA Mode Selection

IDE: For better compatibility.

AHCI: Supports new features that improve performance.

RAID: Combine multiple disk drives into a logical unit.

SATA Aggressive Link Power Management

SATA Aggressive Link Power Management allows SATA devices to enter a low

power state during periods of inactivity to save power. It is only supported by AHCI

mode.

Dynamic Storage Accelerator

Keep this option enabled for higher HDD and SDD I/O performance, lower latency

and increased system responsiveness.

AHCI (Advanced Host Controller Interface) supports NCQ and other new

features that

will improve SATA disk performance but IDE mode does not have these advantages.

Summary of Contents for Q87M vPro
































































































Search results

Summary of Contents for Q87M vPro

Reviews:

Related manuals for Q87M vPro

Brands by name

Popular brands

ASROCK Q87M vPro, User Manual

Search results

Summary of Contents for Q87M vPro

Reviews:

Related manuals for Q87M vPro

Brands by name

Popular brands