2 1
Peripheral Configuration:
OnBoard FDC:
Use this to enable or disable floppy drive controller.
OnBoard Serial Port:
Use this to set addresses for the onboard serial
ports or disable serial ports. Configuration options: [Auto], [Disabled],
[3F8 / IRQ4 / COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3],
[2E8 / IRQ3 / COM4].
OnBoard Infrared Port:
This allows you to enable or disable the
onboard infrared port feature. Select [Auto] will enable this feature if
the infrared module is installed.
OnBoard Parallel Port:
Select Parallel Port address or disable Parallel
Port. Configuration options: [Auto], [Disabled], [378], [278].
Parallel Port Mode:
Set the operation mode of the parallel port.
OnBoard Midi Port:
Select address for Midi Port or disable Midi Port.
Configuration options: [Disabled], [330], [300], [290], [292].
Midi IRQ Select:
Use this to select Midi IRQ. Configuration options:
[5], [10], [11]. The default is 5.
OnBoard Game Port:
Select address for Game Port or disable Game
Port. Configuration options: [200h], [208h], [Disabled].
OnBoard IDE:
To enable either the primary IDE channel or the secondary
IDE channel, set to [Disabled] will disable the both. Configuration
options: [both], [Disabled], [Primary], [Secondary].
OnBoard LAN:
Enable or disable onboard LAN feature.
OnBoard AC’97 Audio:
Enable or disable onboard AC’97 audio feature.
OnBoard MC’97 Modem:
Enable or disable onboard MC’97 modem feature.
System Hardware Monitor:
You can check the status of the hardware on
your system. It allows you to monitor the parameters for CPU temperature,
Motherboard temperature, CPU fan speed, and critical voltage.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Midi IRQ Select
OnBoard Game Port
OnBoard IDE
OnBoard LAN
OnBoard AC' 97 Audio
OnBoard MC' 97 Modem
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Peripheral Configuration
Auto
Auto
Auto
Normal
N / A
Auto
N / A
Disabled
5
Disabled
Disabled
Disabled
Auto
Disabled
Auto
<Enter> to enable or
disable the floppy
drive controller.
