ASROCK P4I65G, Installation Manual

Page: 14 / 84

ASRock P4i65G Motherboard
1 4 1 4
1 4 1 4
1 4
EnglishEnglishEnglishEnglishEnglish
System Panel Header This header accommodates
(9-pin PANEL1)
several system front panel
(see p.2 No. 17)
functions.
Chassis Speaker Header Please connect the chassis
(4-pin SPEAKER 1)
speaker to this header.
(see p.2 No. 18)
Chassis Fan Connector Please connect the chassis fan
(3-pin CHA_FAN1)
cable to this connector and
(see p.2 No. 16)
match the black wire to the
ground pin.
CPU Fan Connector Please connect the CPU fan
(3-pin CPU_FAN1)
cable to this connector and
(see p.2 No. 5)
match the black wire to the
ground pin.
ATX Power Connector Please connect an ATX power
(20-pin ATXPWR1)
supply to this connector.
(see p.2 No. 7)
ATX 12V Connector Please note that it is necessary
(4-pin ATX12V1)
to connect a power supply with
(see p.2 No. 2)
ATX 12V plug to this connector
so that it can provides sufficient
power. Failing to do so will cause
the failure to power up.
Serial port connector This COM1 connector
(9-pin COM1)
supports a serial port module.
(see p.2 item 23)
1. +5VA is used for audio power only, please don’t connect it to any
other power, such as USB.
2. HD (Azalia) audio front panel and AC’97 audio front panel have
different pin-definition. Incorrect connection of the audio front panel
and the front panel audio header may cause permanent damage to
this motherboard.