4 6
4 6
4 6
4 6
4 6
Processor Voltage
This option appears only when you adopt AM2 CPU. This item will show when
“Multiplier/Voltage Change” is set to [Manual]; otherwise, it will be hidden. The
range of the value depends on the CPU you adopt on this motherboard. However,
for safety and system stability, it is not recommended to adjust the value of
this item.
CPU Frequency Multiplier
This option appears only when you adopt Phenom CPU. However, for safety
and system stability, it is not recommended to adjust the value of this item.
CPU Voltage
This option appears only when you adopt Phenom CPU. It allows you to adjust
the value of CPU voltage. However, for safety and system stability, it is not
recommended to adjust the value of this item.
NB Frequency Multiplier
This option appears only when you adopt Phenom CPU. However, for safety
and system stability, it is not recommended to adjust the value of this item.
NB Voltage
This option appears only when you adopt Phenom CPU. It allows you to adjust
the value of NB voltage. However, for safety and system stability, it is not
recommended to adjust the value of this item.
Memory Clock
This item can be set by the code using [Auto]. You can set one of the standard
values as listed: [200 MHz (DDRII400)], [266 MHz (DDRII533)],
[333 MHz (DDRII667)] and [400MHz (DDRII800)]. If you adopt Phenom CPU,
there is one more option: [533MHz (DDRII1066)].
Flexibility Option
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Memory Controller Mode
It allows you to adjust the memory controller mode. Configuration options:
[Unganged] and [Ganged]. The default value is [Unganged].
CAS Latency (CL)
Use this item to adjust the means of memory accessing. Configuration options:
[Auto], [3CLK], [4CLK], [5CLK] and [6CLK]. The default value is [Auto].
TRCD
Use this to adjust TRCD values. Configuration options: [Auto], [3CLK], [4CLK],
[5CLK] and [6CLK]. The default value is [Auto].
TRP
Use this to adjust TRP values. Configuration options: [Auto], [3CLK], [4CLK],
[5CLK] and [6CLK]. The default value is [Auto].
