ASROCK K10N78HSLI-1394, Installation Manual

Page: 18 / 224

1 8 1 8
1 8 1 8 1 8
ASRock K10N78hSLI-WiFi / K10N78hSLI-1394 Motherboard
EnglishEnglishEnglishEnglishEnglish
Enjoy the benefit of NVIDIA Enjoy the benefit of NVIDIA
Enjoy the benefit of NVIDIA Enjoy the benefit of NVIDIA
Enjoy the benefit of NVIDIA
® ®
® ®
®
Hybrid SLI Hybrid SLI
Hybrid SLI Hybrid SLI
Hybrid SLI
TM TM
TM TM
TM
To enjoy Hybrid SLI TM feature, please refer to below installation and setup procedures.
Step 1. Install one compatible PCI Express graphics card to PCIE1 slot (green). For
the proper installation procedures, please refer to section “Expansion Slots”.
Step 2. Connect the monitor cable to the correspondent connector on the PCI
Express graphics card on PCIE1 slot.
Step 3. Boot your system. Press <F2> to enter BIOS setup. Enter “Advanced” screen,
and enter “Chipset Settings”. Then set the option “Hybrid SLI” to [Auto] or
[Chipset Default].
Step 4. Boot into OS. Install Hybrid SLI
TM
driver from our support CD to your system.
Hybrid SLI
TM
driver is in the following path of ASRock support CD:
(There are two ASRock support CD in the motherboard gift box pack, please
choose the one for Windows
®
Vista
TM
/ Vista
TM
64-bit.)
..\Drivers\Hybrid SLI driver\nVIDIA\Vista(174.91) (For Windows
®
Vista
TM
OS)
..\Drivers\Hybrid SLI driver\nVIDIA\Vista64(174.91) (For Windows ®
Vista TM 64-bit OS)
Step 5. Restart your computer. Then you will find the Hybrid icon on your Windows ®
taskbar.
Step 6. The default setting is GeForce ® Boost mode (Boost Performance). You do not
need to adjust the setup anymore.
NOTE
If you click the Hybrid icon on the Windows
®
task bar, you are allowed to select your
required Hybrid SLI TM mode. However, since this motherboard only support
GeForce ® Boost mode (Boost Performance), please do not select the options
(“Save Power” and “Additional Displays”) other than “Boost Performance”.