ASROCK CONROE1333-ESATA2, Quick Installation Manual

Page: 27 / 226

2 7 2 7 2 7 2 7 2 7
ASRock ConRoe1333-eSATA2 Motherboard
EnglishEnglishEnglishEnglishEnglish
2. If you plan to install two eSATAII devices to this motherboard, you need to
enable both the top and the bottom eSATAII ports of the I/O shield. In order to
enable the top and the bottom eSATAII ports of the I/O shield, you have to
connect the red SATAII connector (SATAII_RED (PORT2); see p.2 No.21) and
the red eSATAII connector (eSATAII_BOTTOM; see p.2 No.36) with a SATA
data cable first, and then connect the orange SATAII connector
(SATAII_ORANGE (PORT3); see p.2 No.15) and the orange eSATAII connec-
tor (eSATAII_TOP; see p.2 No.37) with another SATA data cable. After that,
both the top and the bottom eSATAII ports of the I/O shield are enabled.
Please make sure to correctly connect the SATAII and eSATAII connectors
with corresponding color so that the eSATAII function will work successfully.
Connect the SATA
data cables to both
red SATAII connector
(SATAII_RED (PORT2))
and orange SATAII
connector (SATAII_
ORANGE (PORT3))
Connect the SATA
data cables to both
red eSATAII connector
(eSATAII_BOTTOM)
and orange eSATAII
connector (eSATAII_TOP)
Connect the SATA
data cable to the red
SATAII connector
(SATAII_RED (PORT2))
Connect the SATA
data cable to the red
eSATAII connector
(eSATAII_BOTTOM)