ASROCK ALIVENF5SLI-1394, Installation Manual

Page: 15 / 228

1 5 1 5 1 5 1 5 1 5
ASRock ALiveNF5SLI-1394 Motherboard
2.5 SLI 2.5 SLI
2.5 SLI 2.5 SLI
2.5 SLI
TM TM
TM TM
TM
Operation Guide Operation Guide
Operation Guide Operation Guide
Operation Guide
This motherboard supports NVIDIA ® SLI TM (Scalable Link Interface) technology that
allows you to install two identical NVIDIA ® SLI TM enabled PCI Express x16 graphics
cards. Currently, NVIDIA ® SLI TM technology supports Windows ® XP, XP 64-bit, Vista TM
and Vista TM 64-bit OS. Please follow the installation procedures in this section.
SLI TM Technology Requirements
1. You should have two identical SLI
TM
-ready graphics cards that are NVIDIA
®
certified.
2. Make sure that your graphics card driver supports the NVIDIA ®
SLI TM technology. Download the latest driver from the NVIDIA ® website
(www.nvidia.com).
3. Make sure that your power supply unit (PSU) can provide at least the
minimum power required by your system.
Enjoy the benefit of SLI Enjoy the benefit of SLI Enjoy the benefit of SLI Enjoy the benefit of SLI Enjoy the benefit of SLI
TM TM TM TM TM
Step 1. Install the identical SLI TM -ready graphics cards that are NVIDIA ® certified
because different types of graphics cards will not work together properly.
(Even the GPU chips version shall be the same.) Insert one graphics card
into PCIE2 slot and another graphics card to PCIE4 slot. Make sure that the
cards are properly seated on the slots.
Step2. If required, connect an auxiliary power source to the PCI Express graphics
cards.
Step3. Align and insert the SLI Bridge to the goldfingers on each graphics card.
Make sure that the SLI Bridge is firmly in place.
EnglishEnglishEnglishEnglishEnglish