ASROCK ALIVENF5-ESATA2, Installation Manual

Page: 32 / 224

3 2 3 2
3 2 3 2 3 2
ASRock ALiveNF5- Motherboard
EnglishEnglishEnglishEnglishEnglish
NOTE. If you install Windows ® Vista TM / Windows ® Vista TM 64-bit on IDE HDDs and want to
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please set
the RAID configuration by using the Windows RAID installation guide in the following
path in the Support CD:
.. \ RAID Installation Guide
2.15 2.15 2.15 2.15 2.15 Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking T Untied Overclocking Technology echnology echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 6 for the possible overclocking risk before
you apply Untied Overclocking Technology.
install Windows?” page, please insert the ASRock Support CD into your optical drive,
and click the “Load Driver” button on the left on the bottom to load the NVIDIA ® RAID
drivers. NVIDIA ® RAID drivers are in the following path in our Support CD:
.. \ I386 \ Vista32_RAID (For Windows ® Vista TM OS)
.. \ AMD64 \ Vista64_RAID (For Windows ® Vista TM 64-bit OS)
After that, please insert Windows
®
Vista
TM
/ Windows
®
Vista
TM
64-bit optical disk into
the optical drive again to continue the installation.