ASROCK ALIVENF5-ESATA2, Installation Manual

Page: 27 / 224

2 7 2 7 2 7 2 7 2 7
ASRock ALiveNF5- Motherboard
EnglishEnglishEnglishEnglishEnglish
2.11 Hot Plug and Hot Swap F 2.11 Hot Plug and Hot Swap F
2.11 Hot Plug and Hot Swap F 2.11 Hot Plug and Hot Swap F
2.11 Hot Plug and Hot Swap Functions for SA unctions for SA
unctions for SA unctions for SA
unctions for SATTTTTA / SA A / SA
A / SA A / SA
A / SATTTTTAII AII
AII AII
AII
HDDs and eSA HDDs and eSA HDDs and eSA HDDs and eSA HDDs and eSATTTTTAII Devices AII Devices AII Devices AII Devices AII Devices
This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII /
eSATAII Devices in RAID / AHCI mode. NVIDIA
®
nForce 520 chipset provides hardware
support for Advanced Host controller Interface (AHCI), a new programming interface
for SATA host controllers developed thru a joint industry effort. AHCI also provides
usability enhancements such as Hot Plug.
NOTE
What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration, it is called
“Hot Plug” for the action to insert and remove the SATA / SATAII HDDs
while the system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA / SATAII HDD.
What is Hot Swap Function?
If SATA / SATAII HDDs are built as RAID1 or RAID 5 then it is called “Hot
Swap” for the action to insert and remove the SATA / SATAII HDDs while
the system is still power-on and in working condition.
eSATAII is equipped with Hot Plug capability that enables you to exchange
drives easily. For example, with eSATAII interface, you may simply plug your
eSATAII devices to the eSATAII ports instead of opening your chassis to
exchange your SATAII hard disk.
2.12 2.12
2.12 2.12 2.12 Driver Installation Guide
Driver Installation Guide
Driver Installation Guide Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.