ASROCK ALIVEN570SLI-ESATA2, Installation Manual

Page: 30 / 224

3 0 3 0
3 0 3 0 3 0
ASRock ALiveN570SLI-eSATA2 Motherboard
EnglishEnglishEnglishEnglishEnglish
2.12 Hot Plug and Hot Swap F 2.12 Hot Plug and Hot Swap F
2.12 Hot Plug and Hot Swap F 2.12 Hot Plug and Hot Swap F
2.12 Hot Plug and Hot Swap Functions for SA unctions for SA
unctions for SA unctions for SA
unctions for SATTTTTA / SA A / SA
A / SA A / SA
A / SATTTTTAII AII
AII AII
AII
HDDs and eSA HDDs and eSA HDDs and eSA HDDs and eSA HDDs and eSATTTTTAII Devices AII Devices AII Devices AII Devices AII Devices
This motherboard supports Hot Plug and Hot Swap functions for SATA / SATAII / eSATAII
Devices in RAID mode. For the details of Hot Plug function and operation procedures,
please refer to page 35 and 36 of “User Manual” in the Support CD.
NOTE
What is Hot Plug Function?
If the SATA / SATAII HDDs are NOT set for RAID configuration, it is called
“Hot Plug” for the action to insert and remove the SATA / SATAII HDDs
while the system is still power-on and in working condition.
However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA / SATAII HDD.
What is Hot Swap Function?
If SATA / SATAII HDDs are built as RAID1 or RAID 5 then it is called “Hot
Swap” for the action to insert and remove the SATA / SATAII HDDs while
the system is still power-on and in working condition.
eSATAII is equipped with Hot Plug capability that enables you to exchange
drives easily. For example, with eSATAII interface, you may simply plug your
eSATAII devices to the eSATAII ports instead of opening your chassis to
exchange your SATAII hard disk.
Currently, the SATA RAID driver does not support Hot Plug and Hot Swap
functions under Windows ® Vista TM and Vista TM 64-bit OS. Please visit our
website for the driver update in the near future.
ASRock website: http://www.asrock.com