ASROCK ALIVEN570SLI-ESATA2, Installation Manual

Page: 21 / 224

2 1 2 1 2 1 2 1 2 1
ASRock ALiveN570SLI-eSATA2 Motherboard
EnglishEnglishEnglishEnglishEnglish
eSATAII Connector This eSATAII connector
(eSATAII_TOP: see p.2, No. 37)
supports SATA data cable for
external SATAII function. The
current eSATAII interface
allows up to 3.0 Gb/s data
transfer rate.
Serial ATA (SATA) Either end of the SATA data cable
Data Cable can be connected to the SATA /
(Optional)
SATAII hard disk or the SATAII
connector on this motherboard.
You can also use the SATA data
cable to connect SATAII_6
(PORT 3.1) connector and eSATAII
connector.
Serial ATA (SATA) Please connect the black end of
Power Cable SATA power cable to the power
(Optional)
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
eSA
T
A
II_T
O
P
USB 2.0 Headers Besides four default USB 2.0
(9-pin USB6_7)
ports on the I/O panel, there are
(see p.2 No. 19)
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
(9-pin USB4_5)
(see p.2 No. 20)
WiFi/E Header This header supports WiFi+AP
(15-pin WIFI/E)
function with ASRock
(see p.2 No. 26)
WiFi-802.11g or WiFi-802.11n
module, an easy-to-use wireless
local area network (WLAN)
adapter. It allows you to create a
wireless environment and enjoy the
convenience of wireless network
connectivity.
connect to
the power
supply
connect to the SATA
HDD power connector