manualshive.com logo in svg

ASROCK 4Core1600Twins-P35D, User Manual

Share
Download
ASROCK 4Core1600Twins-P35D User Manual Download Page 42

4 2

4 2

4 2

4 2

4 2

2.19

2.19

2.19

2.19

2.19 Untied Overclocking T

Untied Overclocking T

Untied Overclocking T

Untied Overclocking T

Untied Overclocking Technology

echnology

echnology

echnology

echnology

This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of
BIOS setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB
can operate under a more stable overclocking environment.

Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.

Using SATA / SATAII HDDs and eSATAII devices without NCQ function

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY    Advanced screen       IDE Configuration.
B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure
    SATAII as”, please set the option to [IDE].

STEP 2: Install Windows

®

 Vista

TM

 / Vista

TM

 64-bit OS on your system.

After setting up BIOS, you can start to install Windows

®

 Vista

TM

 / Vista

TM

 64-bit on

your system.

Summary of Contents for 4Core1600Twins-P35D





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands