AsReader ASR-L251G User’s Manual
14
６
How to charge
The charging method for this product is as follows.
Plug the included magnetic suction into the Type-C charging interface on the AsReader, and
then connect to the Type-C charging cable to charge. We recommend using a 5V/2A charging
adapter.
If a mobile device is connected, both the product battery and the mobile device battery are
charged.
The power indicator LED is red and remains on while the product is being charged. When the
device is 100% charged, the power indicator LED turns green. Depending on the state of
connection to the mobile device, the LED indicator may blink or keep on.
※
when AsReader is off, once the type-c charging cable is connected, it will automatically start
up and enter the charging state.
※
The power indicator does not show the charging status of the mobile device. Check the
display on the mobile device for its charging status.
※
When an Android device is connected, communication with the Android device cannot be
performed if the battery of this product is charged, so please disconnect the USB-C charging
cable before use.
※
It needs to take 3.5 hours to fully charge the product when the battery runs out.
※
When using the product for the first time or if it has been left unused for a long period of time,
please fully charge the battery of this product before use.
Magnetic suction for USB-C charging cable
USB-C charging interface
USB-C charging cable