AsReader ASR-L251G User’s Manual
13
５
How to scan
When ready as described in chapter 4, make sure the battery is fully charged. Next, start the
application, boot the product, and then check the connection status between the app and the
product.
When connected:
①
For barcodes:
First, you need to select the barcode mode in the application. And then pull the trigger to illuminate
the white illumination and the red laser toward the barcodes to scan the barcodes. (You can also
read it by operating the application instead of using the trigger.)
※
The red laser is for aiming. If you aim at the middle point of the barcode, it will be easier to read.
②
For RF tags:
First, you need to select the RFID mode in the application. Then point the antenna towards the RF
tags and pull the trigger to read /write. (You can also read and write by operating the application
instead of using the trigger.)
※
When using our demo app
If you are using our demo application "AsReader GUN", please refer to
"ASR_L251G_Demo_App_User_Manual_ObjectiveC" for the operation method.