AsReader ASR-020D, Parameter Manual, Page: 34 / 162

B-24
Continuous Bar Code Read
Select Enable to allow decode processing to continue until the trigger event ends or the
Decode Session Timeout on page B-21 occurs. User indications occur upon decoding each bar
code. Select Disable to end decode processing upon a valid decode as well. This mode does
not apply to Presentation Mode.
NOTE We strongly recommends enabling Picklist Mode on page B-20 with this feature. Disabling
Picklist Mode can cause accidental decodes when more than one bar code is in the decoder's field of
view.
This feature is not allowed to use parameters “illumination” and “vibration” simultaneously,
they are set from method “setBeep” in SDK.
If you use this feature, disable either “illumination” or “vibration”.