AsReader ASR-020D, Parameter Manual, Page: 31 / 162

B-21
Decode Session Timeout
This parameter sets the maximum time decode processing continues during a scan attempt.
It is programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default timeout is
9.9 seconds.
To set a Decode Session Timeout, scan the bar code below. Next, scan two numeric bar codes
from Appendix Numeric Bar Codes that correspond to the desired on time. Provide a leading
zero for single digit numbers. For example, to set a Decode Session Timeout of 0.5 seconds,
scan the bar code below, then scan the 0 and 5 bar codes. To correct an error or change the
selection, scan Cancel on page Z-7 .