AsReader ASR-020D, Parameter Manual, Page: 11 / 162

B-1
Set Default Parameter
You can reset the AsReader to two types of defaults: factory defaults or custom defaults.
Scan the appropriate bar code below to reset the decoder to its default settings and/or set its
current settings as custom defaults.

Restore Defaults - Scan this bar code to reset all default parameters as follows.
・
If you previously set custom defaults by scanning Write to Custom Defaults, scan
Restore Defaults to retrieve and restore the decoder’s custom default settings.
・
If you did not set custom defaults, scan Restore Defaults to restore the factory default
values listed in the table in page A-1 .

Set Factory Defaults - Scan this bar code to restore the factory default values listed in
the table in page A-1 . This deletes any custom defaults set.

Write to Custom Defaults - Scan this bar code to set the current decoder settings as
custom defaults.
Once set, you can recover custom default settings by scanning Restore Defaults.